|
|
TWIN-PATH® EXTRA
SLINGS WITH COVERMAX® AND K-SPEC® CORE
YARN
TPXC This is our best synthetic sling. It is made with K-Spec® high
performance
fibers, and it has a bulked nylon outer cover (Covermax®) that
is very abrasion
resistant. These are made in sizes up to 500,000 lbs. vertical rated
capacity. Extra
Heavy Duty Covermax® is used on 40,000 lb. vertical capacity and
higher. All of these slings have overload tell-tails, inner red cover,
and are used worldwide in place of chain and wire rope slings for heavy
lifts. Also, they are repairable. They have fiber optics for inspection.
The Twin-Path® patented design provides the rigger with redundant
protection in the event that one path is cut. These slings have 1%
stretch at rated capacity and are made in matched lengths. These slings
conform to ASME B30.9 Chapter six, US Navy NAVFAC P-307 Section
14, and CI 1905-07. The safety and inspection features found only in Twin-Path® products
were created to overcome shortfalls riggers found in single path roundslings.
US Patent #5,651,572 & #7,661,737
CA #2,195,393 & #2,547,632
EP #0785163 & #1899255 Japan #2929431
Australia #707924
|
|
|
 |
CHECK-FAST® INSPECTION INFORMATION
The Check-Fast® System
is designed to improve job-site safety. The Check-Fast® Tag
and External Warning Indicator (EWI) on a roundsling
product provides for a pass/fail inspection
of the internal load bearing core yarn. Damage
to the core yarn from fiber on fiber abrasion,
fatigue, and severe overload can be detected.
If the sling is mistakenly loaded beyond rated
capacity, the EWI will disappear before the
sling fails. If the sling cover is intact,
the Check-Fast® Tag
and EWI visible, the sling may be used for another lift. This safety system is
available for polyester or High Performance
K-Spec® Fiber Roundslings fabricated by
authorized SLINGMAX® Dealers.
US Patent #7,661,737
CA #2,547,632 EP #1899255
|
 |
TWIN-PATH® ADJUSTABLE
BRIDLE SLING
This tool is an aid to finding the center of gravity. When the load is
lifted the ring moves over the COG to balance and level the object. We
developed this tool in conjunction with riggers in the field for lifting
objects with uneven geometric proportions or off center balance points.
The Twin-Path® Sling may be permanently attached to the ring, or in
the field using a G-Link™ for the connection. The G-Link™ or
the permanent attachment keeps the slings in the same plane as the ring
which is the ideal form of connection.
US Patent #5,651,572 CA #2,195,393
EP #0785163 Japan #2929431
Australia #707924
|
 |
TWIN-PATH® ADJUSTABLE BRIDLES FOR MILITARY AIRCRAFT
These adjustable bridles are designed to give a level lift of military aircraft (nose to tail), regardless of whether the aircraft is “slick” or has attached armaments, fuel in the tanks, or missing parts. They are an excellent tool in recovery situations, even if the crew does not have the option of first removing fuel or attachments. The bridles are complete with all necessary fittings to rig to the original equipment airframe lifting adapters and are lightweight enough for one person to carry the bridle.
US Patent #5,651,572 CA #2,195,393
EP #0785163 Japan #2929431
Australia #707924
|
|
SPARKEATER® SYNTHETIC
SLINGS
SE When you have a hot environment up to 300°F, use a Sparkeater® to
lift the
load without marring the surface of the lifted piece. These slings are made
with Aramid high performance core yarns. Available in capacities of 2,000
to 90,000 lbs. When lifting heated steel, wire rope or chain slings might
scratch the load causing expensive rework. Fire exposure testing was
performed by London Scientific and the product was identified as being
as good as wire rope or chain for use in off-shore applications in the
oil industry.
|
|
SINGLE-PATH HIGH PERFORMANCE SLING WITH K-SPEC® CORE
SPXC This is our newest round
sling. The Check-Fast® Inspection
System was developed specifically for this
sling. The core is K-Spec® high performance
fiber, and it has a bulked nylon outer cover
(Covermax®) that is very abrasion
resistant. These are made in sizes up to 100,000
lbs. vertical rated capacity.
Every SPXC sling comes with the
patented Check-Fast® Inspection
System, the newest innovation from Slingmax® Rigging
Solutions.
US Patent #7,661,737 CA #2,547,632
EP #1899255
|
|
CHECK-FAST® SINGLE-PATH POLYESTER ROUNDSLINGS
This is the only single-path, polyester roundsling with an overload indicator. Fiber optic inspection is optional. The SPCF sling has a Covermax® cover – the most durable available for a syntheticsling.
|
|
TWIN-PATH® EYE & EYE
SYNTHETIC SLING
EE This product is made to be an eye and eye sling only. Usually an eye
and
eye sling is made from a round sling with a sleeve over it to form the
eyes at each end. It can be manufactured using either K-Spec® core
yarn or polyester. Riggers have told us that they have some applications
where they want an eye and eye sling only and this is the one with all
of the Twin-Path® features in a strictly eye and eye product.
US
Patent #5,727,833
US Patent #5,651,572 CA #2,195,393
EP #0785163 Japan #2929431
Australia #707924
|
|
TWIN-PATH® TWO
LEG BRIDLES
TL Simply the lightest and strongest synthetic bridles in the world today.
These are perfect to replace existing chain and wire rope bridles. The
Twin-Path®
synthetic bridle with K-Spec® core yarn is less than half the weight
of any steel
assembly and is the ergonomic bridle of the future, here today. The loop
at the
top goes on the crane hook and there is no heavy steel ring to deal with.
If you need a four leg bridle just order two Twin-Path® Two Leg bridles.
Capacities to 200,000 lbs. Please specify the loop size at the top and
the hardware such as hooks required on the bottom of each leg. The hooks
can be removable if they are attached with
couplers such as G-LinksTM. This gives the Twin-Path® Two Leg Bridle
added versatility on the job.
US Patent #5,651,572 CA #2,195,393
EP #0785163 Japan #2929431 Australia #707924
|
|
|
|
